Mineral Ultrafiltration Water Treatment For Beverage Production Line High Efficiency

Mineral Water Filter Plant Machine for Beverage Production Line

Introduction

UF filter is widely used in processing of mineral water, which features easy operation, less labor force and low running cost.

Composition

Pre-treatment System
Pre-treatment system is composed of mechanical filter (quartz sand filter), active carbon filter and precision filter. The water temperature requires 25±3°C.

1). Mechanical filter
It can remove the suspended solids and gluten particles in the water, thus reduce the turbidity of water.

2). Active carbon filter
It can remove the pigment, smell and a large number of biological organisms in the water
Soften the water.

3). Sodium ion exchanger
It can remove calcium and magnesium ions in the water, so as to soften the water.

UF system
UF filter is composed of high-pressure pump, UF system and chemical cleaning device.

During running, UF membrane may form some deposit and chemical cleaning device is equipped for periodical cleaning to ensure stable running of UF system.

High-pressure pump is the power source of UF system. To UF system on sound running condition, high-pressure pump equips inlet/outlet pressure switch. When inlet pressure is less than set value (water lack P≤0.05Mpa) or outlet pressure is higher than set value, pressure switch send signal to PLC programming system and high-pressure pump and UF system will stop in avoidance of destroying to UF membrane because of water pressure.

UF system can wash surface of UF membrane by low-pressure timely and periodically.

UV sterilizer
It uses the UV to kill some bacteria that may also pass through the reverse osmosis system.

Ozone sterilizer
Some bacteria may not be killed by UV, the sterilizer uses ozone to kill those bacteria.

Specifications

reverse osmosis system

reverse osmosis filtration system

Mineral Ultrafiltration Water Treatment For Beverage Production Line High Efficiency Images